Mold Remediation in Scott, LA: Slab vs. Raised Homes

Scott has older houses raised on piers near the original town and newer slab homes in its subdivisions. Both get mold in Acadiana's humidity, but the mold tends to start in different places. Knowing which kind of house you have tells you where to look and what a fix will involve. For local help, see mold remediation in Scott.

Why the type of house matters

Mold needs moisture. The EPA puts it simply: the key to mold control is moisture control (EPA, A Brief Guide to Mold, Moisture and Your Home). How water gets into a house, and where it sits once it's there, depends heavily on how the house was built.

Raised homes: mold starts underneath

In a house on piers, the crawl space sits above damp ground. Moisture rises from the soil, especially if the vapor barrier is torn, missing or was never installed. Humid outdoor air comes in through vents and condenses on cooler surfaces, like joists and the underside of the subfloor under air-conditioned rooms.

Signs to watch for:

The work usually happens in the crawl space itself: removing damaged insulation, cleaning or treating the framing, replacing the vapor barrier, and dealing with drainage. Our crawl space mold removal page covers that process in detail.

Slab homes: mold starts in the walls and attic

Newer slab homes in Scott have no crawl space, so trouble usually starts somewhere else:

The EPA recommends drying water-damaged materials within 24 to 48 hours to prevent mold growth. In a tight new house, that rarely happens on its own once water is inside a wall.

What remediation looks like in each

The basic steps are the same either way. The scope is what changes.

Raised home

Slab home

In both, expect containment, removal of materials that can't be cleaned, cleaning of what can be saved, drying, and a fix for the source. The EPA says to remove mold rather than just kill it, because dead mold can still cause reactions in some people.

When Louisiana's $7,500 license rule applies

The Louisiana State Licensing Board for Contractors says a mold remediation license is required when the job's value is $7,500 or more (LSLBC mold remediation classification). That's the Act 422 requirement. A whole crawl space can easily be a larger job than a bathroom wall, so if your quote is near that line, ask for the LSLBC license number and check it.

You'll get a free quote in writing before any work starts, so you know where the job falls.

Testing: when it helps, and who should do it

If you can see the mold, the EPA says sampling usually isn't necessary (EPA, Mold Testing or Sampling). Testing can still help if you smell mold and can't find it, or need documentation.

Two Louisiana rules apply. The state doesn't license mold assessors. And the company that assesses a property can't also remediate it, so the assessor and the remediator must be separate, unrelated companies. See mold testing and inspection for how to choose one.

Frequently asked questions

My Scott home is on a slab. Can I still have crawl space mold?
No, but you can have mold in the attic, the walls or around the AC. Start with where water could have gotten in.

Is a musty smell under a raised house always mold?
Not always, but damp soil and wet framing are the usual causes. It's worth a look before it spreads to the subfloor.

Do I need a licensed company?
If the mold remediation is worth $7,500 or more, Louisiana requires an LSLBC license. Ask for it.

Do you also cover Lafayette?
Yes. See mold removal in Lafayette, or call (337) 205-7937 for a free quote.

Dealing with mold in Scott? See mold remediation in Scott, or call (337) 205-7937 for a free quote.

← More guides